Before
Removed old worn carpet tiles and adhesive debris.

During
Primed and latexed floor to make smooth.

After
Installed wood effect hard wearing vinyl planks, ready to receive shop fixtures and fittings with minimal trading down time

Before
Primed and latexed to make smooth concrete area

After
Installed metal effect vinyl tiles ready to receive high footfall from visitors and James Bond vehicles

Before
This project was to replace the existing stuck down carpet with vinyl flooring. We uplifted the carpet and removed before cleaning the sub floor of any old debris.
We then applied a coat of P131 floor primer, shown in this picture (green). This ensures the adhesion of the latex/smoothing compound ready to receive the new floor covering.

After
This picture shows the floor covered in new vinyl flooring. This has been fully adhered to the floor. The joints have been heat welded, edges sealed with clear mastic. This ensures the flooring is now watertight.

Before
This project was for a new retail shop. The existing premises were originally 2 shops made into 1 so the floor heights were different.
We had to scabble out some of the old flooring, prime and patch latex to get some uniform height.
This was then followed with 1 coat of latex as shown in the picture ready to receive the new floor covering.

After
This picture shows the floor covered in Impact rubber flooring. It has been fully stuck to floor and has had clear mastic applied to perimeter. It is now ready to receive the fixtures and fittings for the shop.

Before & During:
Uplift and dispose of old flooring. Prepare floor with primer and latex to Smooth floor

After
installed metal feature strip to create wavy line. One side of this we installed rubber flooring, the other wood effect vinyl planks

Before:
Floor in poor state and uneven

After
Having received a coat of primer and latex to make floor smooth, safety vinyl installed, capped and coved up the walls for ease of cleaning. All joins hot welded and clear mastic to edges to keep water tight.

During
lay new plywood to stair treads and cove forma (black strip) to tread / riser

After
installed safety vinyl to treads and risers, metal nosings with coloured insert for safety and clear mastic to edges. This now means the stairs can be cleaned efficiently as the vinyl is watertight.